Dulux Paint: Their Stores In Lagos And How To Apply Dulux Paints

Dulux Paint was In the early days of its existence, decorators and their suppliers were the main customers for Dulux, with Say Dulux to your decorator used as an advertising slogan in the 1950s. By the year 1953, Dulux was available in the retail market and ten years later the famous Old English Sheepdog was used in advertisements, to the point where “Dulux Dog” has become a common nickname for the breed of a particular Dog Family.

The name Dulux is derived from the words DuPont and Luxury, which over time has become a house name all over the globe. We are looking at various Products from Dulux Paint And How they can be Applied.

Dulux Paint Different Products And How To Apply Them

Dulux Gloss

Good quality gloss paint for both interior and exterior surfaces.

Application information

Coverage 
Up to 15m² per litre on sealed surfaces

Touch dry 
≈ 4-5 Hours

Thinning 
This product can be thinned

Key benefits

High Gloss Finish

Durable

Dirt Resistant

Pack sizes

4L

 

Dulux Matt Emulsion

Good quality matt emulsion for interior and exterior surfaces.

Application information

Coverage 
up to 15m2 per litre

Touch dry 
≈ 20 Minutes

Thinning 
This product can be thinned

Key benefits

Durable

Excellent washability

Withstand humidity

Pack sizes

4L & 20L

 

Dulux Silk Emulsion

For Interior and exterior silk finish ideal for kitchens and bathrooms.

Application information

Coverage 

Touch dry 
≈ 20 Minutes

Thinning 
This product can be thinned

Key benefits

Mid-sheen finish

Durable

withstand humidity

Pack sizes

4L & 20L

 

Dulux Trade High Gloss

Dulux Trade High Gloss is a solvent-based finish suitable for the protection and decoration of most interior and exterior surfaces where a durable high gloss finish is required.

Application information

Coverage 
Coverage up to 18m2

Touch dry 
≈ 4-6 Hours

Thinning 
Thinning not generally required

Key benefits

Tough durable finish

Excellent flow out of brush marks

Will withstand repeated washing

Good opacity / coverage

Resistant to mild chemical fume attack

Can be used on heated surfaces e.g. hot water pipes and radiators

Pack sizes

1, 2.5 and 5 Litre.

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 403 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Apply 1 coat of the appropriate coloured Dulux Trade Undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 hours for the undercoat to dry before applying the gloss finish. Where a second coat of Dulux Trade High Gloss is required, allow a minimum of 16 hours between coats.

For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Gloss. After use, remove as much paint as possible from brushes before cleaning with brush cleaner.

 

Dulux Trade Vinyl Matt

Dulux Trade Vinyl Matt is a top quality, high opacity emulsion which gives excellent coverage and application. It is suitable for all interior wall and ceiling surfaces.

Application information

Coverage
Coverage up to 17m2

Touch dry
≈ 30 Minutes

Thinning
This product can be thinned – see datasheet for full details.

Key benefits

Excellent Opacity

Tough, wipeable finish

Best ever formulation

Pack sizes

1, 2.5 and 5 Litre.

System information

To get the best results with Dulux Trade Vinyl Matt, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 411 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.

 

Dulux Trade Vinyl Silk

Dulux Trade Vinyl Silk is a top quality, durable emulsion with a mid sheen finish. It is suitable for all normal interior wall and ceiling surfaces.Can be used in kitchens and bathrooms.

Application information

Coverage
Coverage up to 16m2

Touch dry
≈ 30 Minutes

Thinning
This product can be thinned – see datasheet for full details.

Key benefits

Tough, washable finish

Good opacity

Good durability

Tough, washable finish

High opacity

Pack sizes

1, 2.5 and 5 Litre.

System information

To get the best results with Dulux Trade Vinyl Silk, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 414 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Silk (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Silk, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.

 

Dulux Trade Vinyl Soft Sheen

Dulux Trade Vinyl Soft Sheen is a top quality, durable emulsion with a softer sheen than silk emulsion. It is suitable for all normal interior wall and ceiling surfaces.

Application information

Coverage
Coverage up to 16m2

Touch dry
≈ 30 Minutes

Thinning
This product can be thinned – see datasheet for full details.

Key benefits

Washable, tough, durable finish

Fashionable mid- sheen emulsion

Pack sizes

1, 2.5 and 5 litre.

 

Dulux Trade Weathershield Smooth Masonry Paint

Weathershield Smooth Masonry Paint is an exterior quality emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film and help it stay cleaner for longer. It is particularly suitable for use in changeable weather and is shower resistant in only 30 minutes after application. Suitable for use on most sound, dry exterior masonry and rendering, including concrete, roughcast, pebble-dash and brickwork which is normally suitable for painting, eg rustic or sand-faced bricks. Common or fletton bricks should not be painted (see BRE Information Paper Number IP22/79, Painting of Common Fletton Brickwork). Painting of parapet, free standing and retaining walls below ground level damp-proof course is inadvisable. In these situations, it may be difficult to prevent moisture penetration and consequent failure of the paint coating. Painting this type of wall may also increase the risk of frost damage and spalling of the brickwork or stonework. BBA Certificate Number 97/3383*.

Application information

Coverage
Coverage up to 16m2

Touch dry
≈ 30 Minutes

Thinning
This product can be thinned – see datasheet for full details.

Key benefits

Smooth formulation resists dirt retention

Up to 15 years protection

Shower resistant in just 30 minutes

Contains a fungicide and algicide to resist disfiguring surface growths

Contains an unique ICI acrylic resin for optimum protection

Pack sizes

5L

System information

To get the best results with Weathershield Smooth Masonry Paint make sure surfaces to be painted are sound, clean and dry (new surfaces particularly fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash. See Dulux Trade Datasheet 418 for full information before use. STIR THOROUGHLY BEFORE USE. Seal all new or bare surfaces with a thinned coat of Weathershield Smooth Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. In normal conditions two coats of Weathershield Smooth Masonry Paint properly applied to the substrate in accordance with the instructions will perform satisfactorily for up to 15 years giving good colour stability (as part of BBA certificate 97/3383). See current colour collateral for choice of colours. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use remove as much paint as possible from brushes before cleaning with water.

 

Dulux Trade Weathershield Textured Masonry Paint

Weathershield Textured Masonry Paint is an exterior quality fine texture emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film. The formulation gives an attractive fine granular finish and allows a higher build.

Application information

Coverage
Coverage up to 8m2

Touch dry
≈ 1-2 Hours

Thinning
This product can be thinned – see datasheet for full details.

Key benefits

Helps bridge fine hairline cracks

Contains a fungicide and algicide to resist disfiguring surface growths on its surface

For a textured finish on exterior walls, including blockwork, concrete, stonework, cement rendering, roughcast, pebbledash & brick

Pack sizes

5L

System information

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 419 for full information before use. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned coat of Weathershield Textured Masonry Paint (up to 1 part water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Textured Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from brushes before cleaning with water.

 

Dulux Weathershield Smooth Textured

Textured masonry paint that provides an even smooth texture

Application information

Coverage
Up to 2.5-3m² per litre on sealed surfaces

Touch dry
≈ 30 Minutes

Thinning
This product does not require thinning

Key benefits

It bridges hairline cracks and prevents them reappearing.

Extremely tough

Covers in one coat

Pack sizes

20L

 

Dulux Weathershield Tex-matt

Textured masonry paint that provides a fine pattern

Application information

Coverage
Up to 2-3m² per litre on sealed surfaces

Touch dry
≈ 30 Minutes

Thinning

Key benefits

Superior durability.

It provides an evenly textured, fine patterned finish

Pack sizes

20L

 

Dulux Weathershield Textured

A textured masonry paint that bridges hairline cracks.

Application information

Coverage
Up to 1.5-1.75m² per litre on sealed surfaces

Touch dry
≈ 30 Minutes

Thinning
This product does not require thinning

Key benefits

Textured matt finish

Covers hairline cracks and minor imperfections

Excellent performance in tough weather conditions

Pack sizes

20L

 

Dulux Weathershield Ultra Textured

Textured masonry paint that provides an ultra fine patterned finish

Application information

Coverage
Up to 3-4m² per litre on sealed surfaces

Touch dry

Thinning

Key benefits

Withstand tough weather conditions

Durable

Provides an ultra fine patterned finish

Pack sizes

20L

 

Ecosure Matt

Ecosure, from Dulux Trade, has been specifically formulated to have a demonstrably lower environmental impact than standard Dulux Trade products*, whilst maintaining the highest possible standards of quality and performance. Ecosure Matt from Dulux Trade is a professional quality, high opacity** matt emulsion that provides excellent coverage and application. Suitable for all normal interior wall and ceiling surfaces.

Application information

Coverage
Coverage up to 17m2

Touch dry
≈ 30 Minutes

Thinning
This product can be thinned – see datasheet for full details

Key benefits

35% less Embodied carbon

Virtually zero VOC & added solvents (PBW & Magnolia)

Minimal VOCs.

High Performance

High opacity and coverage

Pack sizes

5 Litre.

System information

To get the best results with Ecosure Matt from Dulux Trade, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 526 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Ecosure Matt from Dulux Trade (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 coats (thinned up to 1 part clean water to 9 parts paint) of Ecosure Matt from Dulux Trade, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.

 

Hammerite Direct to Rust Hammered Finish

Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. Decorative hammered appearance is smooth to the touch and sheds water well.

Application information

Coverage
up to 4.5m2 per litre

Touch dry
≈ 1-2 Hours

Thinning
Brush application: Do not thin Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners or equivalent at a ratio of 15% thinners to paint

Key benefits

Corrosion resistant.

No need for primer or undercoat.

Can be applied directly onto rusty metal.

Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.

Pack sizes

250ml, 750ml, 2.5L and 5L (Black only)

 

Hammerite Direct to Rust Smooth Finish

Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years.

Application information

Coverage
up to 4.5m2 per litre

Touch dry
≈ 1-2 Hours

Thinning
Brush application: Do not thin Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners or equivalent at a ratio of 15% thinners to paint

Key benefits

Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.

Corrosion resistant.

Can be applied directly onto rusty metal.

No need for primer or undercoat.

Pack sizes

250ml, 750ml, 2.5L and 5L (black only)

 

Dulux Paint Company Addresses

Head Quarter

2, Adeniyi Jones Avenue 
Ikeja, Lagos 
Nigeria.

Website: www.duluxnigeria.com

 

Dulux Paint Branch Offices

Lagos Branch

Address: Ajao Estate, Osolo, 11/12 Osolo Way

Phone:0802 319 0872

Hours:

Open today · 8AM–6PM
Dulux Paint Abuja Branch : Abuja, Abuja

Tel 1: +234-798-733-733
Tel 2: +234-1-210-3243
Website: www.duluxnigeria.com

Share this:

Exit mobile version