Dulux Paint: Their Stores In Lagos And How To Apply Dulux Paints
Dulux Paint was In the early days of its existence, decorators and their suppliers were the main customers for Dulux, with Say Dulux to your decorator used as an advertising slogan in the 1950s. By the year 1953, Dulux was available in the retail market and ten years later the famous Old English Sheepdog was used in advertisements, to the point where “Dulux Dog” has become a common nickname for the breed of a particular Dog Family.
The name Dulux is derived from the words DuPont and Luxury, which over time has become a house name all over the globe. We are looking at various Products from Dulux Paint And How they can be Applied.
Dulux Paint Different Products And How To Apply Them
Dulux Gloss
Good quality gloss paint for both interior and exterior surfaces.
Application information
Coverage
Up to 15m² per litre on sealed surfaces
Touch dry
≈ 4-5 Hours
Thinning
This product can be thinned
Key benefits
High Gloss Finish
Durable
Dirt Resistant
Pack sizes
4L
Dulux Matt Emulsion
Good quality matt emulsion for interior and exterior surfaces.
Application information
Coverage
up to 15m2 per litre
Touch dry
≈ 20 Minutes
Thinning
This product can be thinned
Key benefits
Durable
Excellent washability
Withstand humidity
Pack sizes
4L & 20L
Dulux Silk Emulsion
For Interior and exterior silk finish ideal for kitchens and bathrooms.
Application information
Coverage
Touch dry
≈ 20 Minutes
Thinning
This product can be thinned
Key benefits
Mid-sheen finish
Durable
withstand humidity
Pack sizes
4L & 20L
Dulux Trade High Gloss
Dulux Trade High Gloss is a solvent-based finish suitable for the protection and decoration of most interior and exterior surfaces where a durable high gloss finish is required.
Application information
Coverage
Coverage up to 18m2
Touch dry
≈ 4-6 Hours
Thinning
Thinning not generally required
Key benefits
Tough durable finish
Excellent flow out of brush marks
Will withstand repeated washing
Good opacity / coverage
Resistant to mild chemical fume attack
Can be used on heated surfaces e.g. hot water pipes and radiators
Pack sizes
1, 2.5 and 5 Litre.
System information
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 403 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Apply 1 coat of the appropriate coloured Dulux Trade Undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 hours for the undercoat to dry before applying the gloss finish. Where a second coat of Dulux Trade High Gloss is required, allow a minimum of 16 hours between coats.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Gloss. After use, remove as much paint as possible from brushes before cleaning with brush cleaner.
Dulux Trade Vinyl Matt
Dulux Trade Vinyl Matt is a top quality, high opacity emulsion which gives excellent coverage and application. It is suitable for all interior wall and ceiling surfaces.
Application information
Coverage
Coverage up to 17m2
Touch dry
≈ 30 Minutes
Thinning
This product can be thinned – see datasheet for full details.
Key benefits
Excellent Opacity
Tough, wipeable finish
Best ever formulation
Pack sizes
1, 2.5 and 5 Litre.
System information
To get the best results with Dulux Trade Vinyl Matt, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 411 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.
Dulux Trade Vinyl Silk
Dulux Trade Vinyl Silk is a top quality, durable emulsion with a mid sheen finish. It is suitable for all normal interior wall and ceiling surfaces.Can be used in kitchens and bathrooms.
Application information
Coverage
Coverage up to 16m2
Touch dry
≈ 30 Minutes
Thinning
This product can be thinned – see datasheet for full details.
Key benefits
Tough, washable finish
Good opacity
Good durability
Tough, washable finish
High opacity
Pack sizes
1, 2.5 and 5 Litre.
System information
To get the best results with Dulux Trade Vinyl Silk, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 414 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Silk (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Silk, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.
Dulux Trade Vinyl Soft Sheen
Dulux Trade Vinyl Soft Sheen is a top quality, durable emulsion with a softer sheen than silk emulsion. It is suitable for all normal interior wall and ceiling surfaces.
Application information
Coverage
Coverage up to 16m2
Touch dry
≈ 30 Minutes
Thinning
This product can be thinned – see datasheet for full details.
Key benefits
Washable, tough, durable finish
Fashionable mid- sheen emulsion
Pack sizes
1, 2.5 and 5 litre.
Dulux Trade Weathershield Smooth Masonry Paint
Weathershield Smooth Masonry Paint is an exterior quality emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film and help it stay cleaner for longer. It is particularly suitable for use in changeable weather and is shower resistant in only 30 minutes after application. Suitable for use on most sound, dry exterior masonry and rendering, including concrete, roughcast, pebble-dash and brickwork which is normally suitable for painting, eg rustic or sand-faced bricks. Common or fletton bricks should not be painted (see BRE Information Paper Number IP22/79, Painting of Common Fletton Brickwork). Painting of parapet, free standing and retaining walls below ground level damp-proof course is inadvisable. In these situations, it may be difficult to prevent moisture penetration and consequent failure of the paint coating. Painting this type of wall may also increase the risk of frost damage and spalling of the brickwork or stonework. BBA Certificate Number 97/3383*.
Application information
Coverage
Coverage up to 16m2
Touch dry
≈ 30 Minutes
Thinning
This product can be thinned – see datasheet for full details.
Key benefits
Smooth formulation resists dirt retention
Up to 15 years protection
Shower resistant in just 30 minutes
Contains a fungicide and algicide to resist disfiguring surface growths
Contains an unique ICI acrylic resin for optimum protection
Pack sizes
5L
System information
To get the best results with Weathershield Smooth Masonry Paint make sure surfaces to be painted are sound, clean and dry (new surfaces particularly fully dry). Treat any areas affected by mould, lichens and algae with a suitable fungicidal wash. See Dulux Trade Datasheet 418 for full information before use. STIR THOROUGHLY BEFORE USE. Seal all new or bare surfaces with a thinned coat of Weathershield Smooth Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Smooth Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. In normal conditions two coats of Weathershield Smooth Masonry Paint properly applied to the substrate in accordance with the instructions will perform satisfactorily for up to 15 years giving good colour stability (as part of BBA certificate 97/3383). See current colour collateral for choice of colours. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use remove as much paint as possible from brushes before cleaning with water.
Dulux Trade Weathershield Textured Masonry Paint
Weathershield Textured Masonry Paint is an exterior quality fine texture emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film. The formulation gives an attractive fine granular finish and allows a higher build.
Application information
Coverage
Coverage up to 8m2
Touch dry
≈ 1-2 Hours
Thinning
This product can be thinned – see datasheet for full details.
Key benefits
Helps bridge fine hairline cracks
Contains a fungicide and algicide to resist disfiguring surface growths on its surface
For a textured finish on exterior walls, including blockwork, concrete, stonework, cement rendering, roughcast, pebbledash & brick
Pack sizes
5L
System information
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 419 for full information before use. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned coat of Weathershield Textured Masonry Paint (up to 1 part water to 5 parts paint). The normal finishing process is 2 full coats of Weathershield Textured Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source. After use, remove as much paint as possible from brushes before cleaning with water.
Dulux Weathershield Smooth Textured
Textured masonry paint that provides an even smooth texture
Application information
Coverage
Up to 2.5-3m² per litre on sealed surfaces
Touch dry
≈ 30 Minutes
Thinning
This product does not require thinning
Key benefits
It bridges hairline cracks and prevents them reappearing.
Extremely tough
Covers in one coat
Pack sizes
20L
Dulux Weathershield Tex-matt
Textured masonry paint that provides a fine pattern
Application information
Coverage
Up to 2-3m² per litre on sealed surfaces
Touch dry
≈ 30 Minutes
Thinning
Key benefits
Superior durability.
It provides an evenly textured, fine patterned finish
Pack sizes
20L
Dulux Weathershield Textured
A textured masonry paint that bridges hairline cracks.
Application information
Coverage
Up to 1.5-1.75m² per litre on sealed surfaces
Touch dry
≈ 30 Minutes
Thinning
This product does not require thinning
Key benefits
Textured matt finish
Covers hairline cracks and minor imperfections
Excellent performance in tough weather conditions
Pack sizes
20L
Dulux Weathershield Ultra Textured
Textured masonry paint that provides an ultra fine patterned finish
Application information
Coverage
Up to 3-4m² per litre on sealed surfaces
Touch dry
Thinning
Key benefits
Withstand tough weather conditions
Durable
Provides an ultra fine patterned finish
Pack sizes
20L
Ecosure Matt
Ecosure, from Dulux Trade, has been specifically formulated to have a demonstrably lower environmental impact than standard Dulux Trade products*, whilst maintaining the highest possible standards of quality and performance. Ecosure Matt from Dulux Trade is a professional quality, high opacity** matt emulsion that provides excellent coverage and application. Suitable for all normal interior wall and ceiling surfaces.
Application information
Coverage
Coverage up to 17m2
Touch dry
≈ 30 Minutes
Thinning
This product can be thinned – see datasheet for full details
Key benefits
35% less Embodied carbon
Virtually zero VOC & added solvents (PBW & Magnolia)
Minimal VOCs.
High Performance
High opacity and coverage
Pack sizes
5 Litre.
System information
To get the best results with Ecosure Matt from Dulux Trade, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 526 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints. STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Ecosure Matt from Dulux Trade (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 coats (thinned up to 1 part clean water to 9 parts paint) of Ecosure Matt from Dulux Trade, but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job at one time from the same source. After use, remove as much paint as possible from equipment before cleaning with water.
Hammerite Direct to Rust Hammered Finish
Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. Decorative hammered appearance is smooth to the touch and sheds water well.
Application information
Coverage
up to 4.5m2 per litre
Touch dry
≈ 1-2 Hours
Thinning
Brush application: Do not thin Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners or equivalent at a ratio of 15% thinners to paint
Key benefits
Corrosion resistant.
No need for primer or undercoat.
Can be applied directly onto rusty metal.
Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.
Pack sizes
250ml, 750ml, 2.5L and 5L (Black only)
Hammerite Direct to Rust Smooth Finish
Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. This is a brilliant gloss finish which will retain its sheen for years.
Application information
Coverage
up to 4.5m2 per litre
Touch dry
≈ 1-2 Hours
Thinning
Brush application: Do not thin Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners or equivalent at a ratio of 15% thinners to paint
Key benefits
Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside.
Corrosion resistant.
Can be applied directly onto rusty metal.
No need for primer or undercoat.
Pack sizes
250ml, 750ml, 2.5L and 5L (black only)
Dulux Paint Company Addresses
Head Quarter
2, Adeniyi Jones Avenue
Ikeja, Lagos
Nigeria.
Website: www.duluxnigeria.com
Dulux Paint Branch Offices
Lagos Branch
Address: Ajao Estate, Osolo, 11/12 Osolo Way
Phone:0802 319 0872
Hours:
Open today · 8AM–6PM
Dulux Paint Abuja Branch : Abuja, Abuja
Tel 1: +234-798-733-733
Tel 2: +234-1-210-3243
Website: www.duluxnigeria.com
More Related Post You Should Read
